
Pro Wall Chimney Hood Specifications 7
wolfappliance.com/specs
Installation Specifications
T
he illustration below provides dimensions critical for
proper installation of the pro wall chimney hood. Dimen-
sions A and B in the illustration will vary with the width of
the hood. Refer to the chart below.
Pro Wall Chimney Hoods
WIDTH OF HOOD AB
36" (
914)
18" (
457)
9" (
228)
42" (
1067)
24" (
610)
12" (
304)
48" (1219) 30" (762) 15" (381)
54" (1371) 36" (914) 18" (457)
B
TO CENTER
OF TRANSITION
A
WIDTH OF TOP PLATE
6
3
/4"
(171)
10"
(254)
7"
(178)
13
1
/2"
(343)
Pro wall chimney hoods.
Electrical Requirements
W
olf pro ventilation hoods require a separate, grounded
120 V AC, 60 Hz power supply. The service should have its
own 15 amp circuit breaker. Locate the electrical supply
through the top of the hood, within the shaded area shown
in the installation specifications illustration on the previous
page.
IMPORTANT NOTE: You must follow all National Electrical
Code regulations. In addition, be aware of local codes and
ordinances when installing your service.
Risk of electrical shock. This ventilation hood must be
properly grounded. Electrical service for the hood must
be installed by a qualified electrician in accordance
with all applicable national and local electrical codes.
Comentários a estes Manuais