Wolf R484CG Manual do Utilizador descarregar pdf (Página 10)

B U R N E R A S S E M B LY

After cleaning or removing burner parts for

any reason, it is extremely important that you

reassemble the burners correctly. Refer to the

illustrations below for proper alignment of the

upper and base burner parts.

The center burner cap does not have a special

orientation but should be seated flat.

S U R FA C E B U R N E R S

A spark electrode ignites each surface burner.

This control eliminates the need for continuous

open flame pilots. For added safety and

convenience, each burner is designed with an

electronic reignition system. This feature

enables any burner to relight automatically in

the event it is accidentally extinguished.

Each surface burner provides a rating of 16,000

Btu/hr (4.7 kW) on

HIGH

with 500 Btu/hr

(.1 kW) delivered at simmer.

In case of a power outage, you can relight the

surface burners manually. Turn the control

knob to

HIGH

, then use a minimum 6" (152)

igniter to manually light the burner.

W O L F G A S R A N G E S U R F A C E O P E R AT I O N

Failure to position the burner parts

correctly could cause flames or gas to

escape and burn between parts, resulting

in poor combustion or damage to your

gas range.

Manually relight each burner individually.

Do not try to manually relight the French

Top, charbroiler or griddle.

Center Cap

Porcelain TopOuter Burner

Ring

Igniter

Drip Pan

Upper burner parts and alignment

Center CapIgniter

Burner Base

Cross

Ring

Base burner parts and alignmentManually relighting the burner

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comentários a estes Manuais

Sem comentários

Wolf R484CG Manual do Utilizador Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf R484CG