Wolf DCL-200 FD Especificações descarregar pdf (Página 21)

DCL-200 FD1080p DLP LED Front Projector User’s Manual

Projector ON, INPUT Select Procedures

Connect the required external equipment to the projector before operating the following procedures.

Note: The language preset at the factory is English. If you want to change the on-screen display to another language, reset the

language according to the procedure on page 21.

Note: The power indicator light indicates the status of the LED.

• Blue: The power is ready.

• Blue Blinking: The Projector is powering up or down.

Note: If you accidentally press power and do

not want to turn off the projector, press

Exit button or select No to turn off the

confirmation message.

1 Plug the power cords into the wall outlet.

The power indicator illuminates blue, and the

projector enters a standby mode.

2 Select the TV/Projector button, then the

POWER ON button.

The power indicator turns off.

3 Press the SCALER button, aim the remote at

the ProScaler and select the desired INPUT

1-10 via the remote control.

4 Press the POWER ON button on the remote

control, then press the center OK button

to turn off the projector whenever the

confirmation message is displayed.

Projector Power ON Button

Press to turn the Projector on

TV/Projector Select Button

Press to enable all remote

functions for the Projector

OK Button

Source Device Input Buttons

Press to directly select the

available components connected

to the ProScaler Processor

SCALER Button

Press to change remote from

projector controles to

ProScaler processor funtions

Basic Operation

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

Sem comentários

Wolf DCL-200 FD Especificações Página 21