Wolf SDC-15 Especificações descarregar pdf (Página 52)

SDC-15

Normal

High

Correction Value

Gamma

Adjustment

White

Red

Green

Blue

Reset

Adjust the brightness of the lamp.

(*) If continually used in the “High” mode, the lamp will dim sooner and will likely require earlier replacement.

(*) For about 60 seconds after the lamp is lit, the lamp cannot be switched off.

Settings: Normal, High [Normal]

Normally this setting is optimal (160W drive).

Commonly used in a brighter lit rooms, this setting may be chosen. (220W drive)

Emphasizes the outline sharpness of all images.Adjust to your preference.

Values: 0 to 50 (sharper)

This control makes minute details of the image “stand out.”Adjust to your preference.

Values: 0 to 50 (strong)

[1] Create custom gamma curves and save in the Custom 1, 2, and 3 memory settings.

Please adjust to your preference.

(*) Initial values of Custom 1, 2, and 3 are the same as for “Normal”.

(*) Please refer to the figure at the bottom for adjustment.

(*) It is recommended that you read “Gamma Curve” (page reference: 56) for hints about adjustment.

You can choose to add the underlying gamma curve adjustment.

(*) Can choose any setting, as the default gamma curve will always appear linear. Settings: Normal,A, B, C, D

(brightens in particular dark to intermediate parts) 1.8 to 2.6 (darkens in particular dark to intermediate parts)

in the range of values with increments of 0.1 [Normal]

The gamma curve for “green” is being displayed as being representative. If “white”,“red,” “green” or “blue” are selected,

the corresponding color curves are displayed.

Place the cursor on a gamma curve with 12 points with the buttons for left and right, and then use the buttons for up and

down buttons to move those points up or down.

Red, green and blue can be adjusted at the same time.

Adjust only the gamma curve for red.

Adjust only the gamma curve for green.

Adjust only the gamma curve for blue.

The same data as for the "Normal" modes are used when resetting custom gamma.

(*) When you exit the adjustment menu of Custom Gamma, please save the adjustment values.

You can return to the original data, which should be saved.

Lamp Power

Sharpness

Detail Enhance

Custom 1~3

1-2-1 Sharpness

1-2-2 Custom Gamma

Custom Gamma

Correction Value

White

Red

Green

Blue

Reset

1023

512

100(%)

Custom1

Custom2

Custom3

Picture Adjust

Exit

BACK

Back

Select

Operate

Normal

Gradation diagram

corresponding to the

gamma curve.

Gamma curve

Gradation at the

selected point.

(*)

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

Comentários a estes Manuais

Sem comentários

Wolf SDC-15 Especificações Página 52

Comentários a estes Manuais