Wolf W302210I Manual do Utilizador Página 1

I NSTALLATION I NSTRUCTIONSP RO W ALL V ENTILATION H OODS

10WOLF PRO WALL VENTILATION HOODSACCESSORIESOptional acces-sories are availablethrough yourWolf dealer. Toobtain local dealerinformation, visitthe Loc

11Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONS17 " (432)8" (203)Wall Cut-Out AreaHood Ce

12WOLF PRO WALL VENTILATION HOODSRough-In PlateMounting HolesSoffitHood installationLOW-PROFILE AND 24" (610) HOODSSTEP 5: INSTALL THE HOODIMPORT

13Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONS30" TO 36" (762–914) COUNTERTOP TO BOTTOM

The hood assembly is shipped with therough-in plate/transition attached. Thetransition is shipped upside down in the topof the hood. It must be remove

15Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONSRough-InPlateSoffitMountingHolesHood installation27&

Remove the electrical box cover from therough-in plate. Connect black wire to powersupply black wire, white wire to powersupply white wire and green w

17Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONSINTERNAL BLOWERSIMPORTANT NOTE:Refer to the specific

18WOLF PRO WALL VENTILATION HOODSACCESSORIESOptional acces-sories are availablethrough yourWolf dealer. Toobtain local dealerinformation, visitthe Loc

19Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONSIN-LINE AND REMOTE BLOWERSBLOWER WIRINGIMPORTANT NOT

As you follow these instructions, you willnotice WARNING and CAUTION symbols.This blocked information is important for thesafe and efficient installat

20WOLF PRO WALL VENTILATION HOODSREMOTE BLOWERSBLOWER-60REM (801640) – 600 CFMremote blower for low-profile wall hoods(except Models W302210I and W362

21Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONSACCESSORIESOptional acces-sories are availablethroug

22CONTACTINFORMATIONWolf CustomerService:800-332-9513Website:wolfappliance.comTROUBLESHOOTINGIMPORTANT NOTE:If the Pro wall ventilationhood does not o

23CUT-OUT FOR LOGO PLACEMENTBOTTOM EDGE OF HOODFOLD LINE FOR LOGO PLACEMENTLEFT OUTER EDGE OF HOOD

809340 7/2006WOLF APPLIANCE COMPANY, INC. P. O. BOX 44848 MADISON, WI 53744 800-332-9513 WOLFAPPLIANCE.COM

3INSTALLATION REQUIREMENTSIMPORTANT NOTE:This installation must becompleted by a qualified installer or Wolfauthorized service center technician.Insta

4WOLF PRO WALL VENTILATION HOODSIMPORTANT NOTE:Wolf recommends thatthe Pro wall ventilation hood be installed30" (762) to 36" (914) above th

5Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONS10" (254)OVERALLHEIGHTOVERALL WIDTH 4" (102

6WOLF PRO WALL VENTILATION HOODS30" TO 36"(762–914)TO COUNTERTOP30" TO 36"(762–914)TO COUNTERTOP10" (254)18" (457)HEIGHT

7Dimensions in parentheses are inmillimeters unless otherwise specified.INSTALLATION INSTRUCTIONSINSTALLATION SPECIFICATIONSThe following chart provid

8LOW-PROFILE AND 24" (610) HOODSSTEP 1: INSTALL DUCTWORKIMPORTANT NOTE:Wolf recommends thatthe Pro wall ventilation hood be installed30" (76

LOW-PROFILE AND 24" (610) HOODSAlways install a roof or wall cap if you are notinstalling a remote blower. Connect 8" (203)round metal ductw