Wolf CT30ES Guia do Utilizador descarregar pdf (Página 73)

WOLF SEALED BURNER RANGETOPS

PLANNING INFORMATION

Wolf sealed burner rangetops come in 30" (762),

36" (914) and 48" (1219) widths. Specifications

on the following pages provide overall dimen-

sions, finished rough opening dimensions and

installation specifics for each size of sealed

burner rangetop. We have minimized the infor-

mation contained in the illustrations, concentrat-

ing on the critical information you need to plan

your installation.

IMPORTANT NOTE: Caution must be used in

planning the proper installation of the Wolf

sealed burner rangetop to avoid fires or damage

to adjacent cabinetry or kitchen equipment.

Please follow the minimum clearances estab-

lished in the finished rough opening dimensions.

Refer to specifications on the following pages

for your model.

It is recommended that you use a Wolf Pro

ventilation hood or hood liner with the Wolf

sealed burner rangetop. Refer to pages 102–114

for Pro ventilation specifications. A downdraft

can be used with Models SRT304 and SRT366.

An accessory trim kit is necessary for this

installation. Contact your Wolf dealer for details.

ELECTRICAL | GAS REQUIREMENTS

Specifications on the following pages provide

electrical and gas requirements for each size

of sealed burner rangetop.

The Wolf sealed burner rangetop requires a

110/120 V AC, 50/60 Hz electrical supply to

operate the electronic ignition system. The

power supply cord is equipped with a 3-prong,

grounded plug for protection against shock

hazard. The service should have its own 15 amp

circuit breaker.

IMPORTANT NOTE: A ground fault circuit

interrupter (GFCI) is not recommended and may

cause interruption of operation.

Wolf sealed burner rangetops are designed to

operate on natural gas at 5" (12.5 mb) WC

(water column) pressure or LP (propane) gas at

10" (25 mb) WC pressure. The minimum line

pressure for natural gas is 7" (17.5 mb) WC and

11" (27.4 mb) WC for LP gas. The maximum gas

supply pressure to the regulator should never

exceed 14" (34.9 mb) WC, .5 psi (3.5 kPa).

If local codes permit, a certified, 3' (.9 m) long,

/2" or

/4" I.D. flexible metal appliance connector

is recommended for connecting the rangetop to

the gas supply line.

IMPORTANT NOTE: A separate external gas

shut-off valve must be located near the rangetop

in an accessible location.

The platform for the rangetop must be

/4" (19)

thick and include a cut-out at the right rear for

gas supply and electrical connections.

Locate electrical and gas supply within the

shaded area shown in the Installation

Specifications illustration for your model.

You must follow all National Electrical Code and

gas regulations. In addition, be aware of local

codes and ordinances when installing your

services.

HIGH ALTITUDE

Wolf sealed burner

rangetops using

natural gas function

up to an altitude of

8,000' (2438 m)

without any adjust-

ment. Natural gas

and LP gas installa-

tions from 8,000'

(2438 m) to 11,000'

(3353 m) need the

high altitude kit.

Contact your Wolf

dealer for details.

BURNER RATING

Sealed Burner Rangetops

Surface Burners 15,000 Btu/hr (4.4 kW)

with 950 Btu/hr (.3 kW)

delivered at simmer

(1) 9,200 Btu/hr (2.7 kW)

with 325 Btu/hr (.1 kW)

delivered at simmer

Infrared Charbroiler 16,000 Btu/hr (4.7 kW)

Infrared Griddle

Natural Gas 15,000 Btu/hr (4.4 kW)

LP Gas 13,000 Btu/hr (3.8 kW)

Infrared Double Griddle

Natural Gas (2) 15,000 Btu/hr (4.4 kW)

LP Gas (2) 13,000 Btu/hr (3.8 kW)

French Top 15,000 Btu/hr (4.4 kW)

Refer to the specific model requirements

for risers in non-island installations.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 119 120

Comentários a estes Manuais

Sem comentários

Wolf CT30ES Guia do Utilizador Página 73

Comentários a estes Manuais

Manuais e produtos relacionados com Fornos Wolf CT30ES