Wolf DCX-1000I Especificações descarregar pdf (Página 53)

3-30

ADVANCED IMAGE SETTINGS

— SUBMENU

Use the Advanced Image Settings

submenu to make the adjustments

necessary for lesser-used but more

specialized applications on your

projector.

GAMMA TABLE — This control applies a

default video, graphics or simple gamma

table or “curve” to your images, controlling

the intensity of mid-level colors and

producing maximum contrast, brightness

and color performance. As shown at right, the graphics curve

isamodiedpowercurvethatwillshowmoredetailindarker

areas of the projected content while the video curve has a linear

segment near black to compensate for increased black levels

typical of video signals. A simple gamma curve is a true power

curve that does not alter the contrast or the intensity of mid-level

colors.

Keep in mind that any Gamma Table choice sets the related

Gamma value (shown in the Picture Adjustments menu) to a 2.6

default,whereitcanbene-tunedasdesired.Differentvalues

(1-3) here indicate that the original gamma table has been

adjusted with either the Gamma slide bar or direct key.

SELECT COLOR ADJUSTMENT — In “Select Color Adjustment”,

choose an overall color performance for all images. The “Max Drives”

factory default simply drives all 3 colors at their maximum level so that

theyarefullyonandcannotbechanged.Thetwootherpre-denedcolor

adjustment choices — SD Video and HD Video — apply a color gamut

optimizedforvideosources(standardorhigh-denition).Alternatively,

you can specify a color temperature, which enables the nearby Color

Temperature slidebar and applies its current setting (default = 6500K).

Ifnoneofthepre-dened“SelectColorAdjustment”optionsorcolor

temperatures suit your application, select one of four color gamuts

previously dened by a user (User 1, 2, 3, 4). A “User” option applies a customized color

performance in which the user has precisely set the hue and intensity of each color component

in the Color Adjustment by X/Y or Color Temp Adjust submenus, and is most often needed with

multiple-projector applications. Select the color adjustment producing the best color accuracy for

your application and installation.

Tocongurea“User”coloradjustment(gamut),useeithertheColor Adjustment by X/Y or Color

Temp Adjust submenu found in the Display Setup menu under Geometry and Color.

NOTES: 1) “Color Temperature” defaults to 6500K until changed. All four “User” options default

to SD Video unless the user has redened them. 2) Factory-dened color primaries, which

ensure consistent color gamut from projector-to-projector, can be calibrated in the Service

menu only. If you suspect alteration, the factory settings can be recovered with selection of

“Reset to Factory Defaults?” in the Color Primary Settings submenu within the Service menu

(password-protected).

Section3►Operation

Advanced Image S ettings

Gamma Table

Select Color Adjustment

Color Temperature

Iris

Simulation 3D

Motion Filter

2/3 Pulldown Threshold

Detail Threshold

Graphics

Max. Drives

7600

Auto

Gamma Table

Graphics

Video

Simple

B&W Film

Film 1

Film 2

Fluorescent

Incandescent

Sunlight

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 150 151

Comentários a estes Manuais

Sem comentários

Wolf DCX-1000I Especificações Página 53

Comentários a estes Manuais

Manuais e produtos relacionados com Projetores Wolf DCX-1000I