6
SDC-12/SDC-15
3D Format and Settings
For additional information about 3D viewing refer to the SDC-12 and SDC-15 2013 User’s Manual. (Reference pages: 56 and 62-64)
3D Format This control selects the 3D input signal format. Use the [LEFT] and [RIGHT] keys to configure the desired
settings. Press the [OK] key to display the available settings list, then use the [UP]/[DOWN] keys to make your
selection. The [BACK] key returns you to the previous screen.
(*) Some signals may not be embedded with 3D information, thus the image projected may revert to 2D.
Reconfigure such selections manually.
Settings: Auto, Side by Side, Top & Bottom, 2D
Auto 3D formats are determined automatically.
Side by Side Select this if the 3D input signal is the side by side method.
Top and Bottom Select this if the 3D signal is the top and bottom method.
2D Projected as a 2D signal.
2D/3D This feature converts current 2D images into a quasi-3D video image. This effect may not be visible with
certain content.
On Select to convert 2D video images to 3D
Off Select to NOT convert 2D images into 3D
Parallax This function enables fine adjustment of any misalignment of the left and right 3D video images. Adjust these
settings to your preference by using the [LEFT]/[RIGHT] keys. Press the [OK] key to display the adjustment
window. The [BACK] key returns you to the previous screen.
(*) Cannot be adjusted when the “2D/3D” feature is ON.
Settings: -15~15
Crosstalk Cancel This reduces cross-talk within 3D image content. Adjust these settings to your preference by using the
[LEFT]/[RIGHT] keys. Press the [OK] key to display the adjustment window. The [BACK] key returns you to
the previous screen.
(*) May be adjusted during 3D playback but not when the “2D/3D” feature is ON.
White Settings: -8~8
Red Settings: -8~8
Green Settings: -8~8
Blue Settings: -8~8
Intensity This function adjust for image depth perception. Adjust these settings to your preference by using the
[LEFT]/ [RIGHT] keys. Press the [OK] key to display the adjustment window. The [BACK] key returns you to
the previous screen.
(*) May be adjusted when the “2D/3D” feature is ON.
Settings: 1~5
Sub Title Adjust Select this to automatically identify subtitles and set 3D conversion to On or OFF. Adjust settings to
your preference.
(*) May be adjusted when the “2D/3D” feature is ON.
(*) There may be instances where automatic identification does not work, or certain images are identified
as subtitles. Use the [LEFT]/[RIGHT] keys to configure your desired settings. Press the [OK] key to display
the settings list, then use the [UP]/[DOWN] keys to make your selections. The [BACK] key returns you to
the previous screen.
Settings: On, Off
(151 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais