Wolf CTEIH42I Guia de Instalação descarregar pdf (Página 5)

Cooktop Low-Profile Hood Specifications 5

wolfappliance.com/specs

Installation Considerations

olf cooktop low-profile hoods are recommended for

use with Wolf induction, electric and gas cooktops and

integrated modules. These hoods have a telescopic flue

that allows you to reach a ceiling height of 8' (2.4 m) to

9' (2.7 m) with a finished look.

IMPORTANT NOTE: Wolf recommends that the bottom

of the ventilation hood be installed 24" (610) to 30" (762)

above the countertop.

Low-profile wall and island hoods are available with an

internal blower. Wall hood models CTEWH36 and

CTEWH45 will require an in-line or remote blower

assembly, available through your authorized Wolf dealer.

For local dealer information, visit the find a showroom

section of our website, wolfappliance.com.

The blower will vary in size and is dictated by the cooking

unit, the volume of air that needs to be moved and the

length of the duct run. Refer to ventilation recommenda-

tions in the Wolf design guide. These hoods have an 6"

(152) round duct with vertical discharge.

IMPORTANT NOTE: Use only a Wolf blower with the

cooktop low-profile hood.

BACKSPLASH

Optional stainless steel backsplashes are available in

widths to match all cooktop low-profile hoods through

your authorized Wolf dealer. For local dealer information,

visit the find a showroom section of our website,

wolfappliance.com.

Electrical Requirements

Wolf cooktop low-profile ventilation hoods require a

separate, grounded 120 V AC, 60 Hz power supply. The

service should have its own 15 amp circuit breaker.

Locate the electrical supply within the shaded area shown

in the illustration for your specific model on the following

pages.

IMPORTANT NOTE: You must follow all National Electrical

Code regulations. In addition, be aware of local codes and

ordinances when installing your service.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sem comentários

Wolf CTEIH42I Guia de Instalação Página 5