Wolf VC36S Guia de Instalação descarregar pdf (Página 4)

Wolf Customer Care 800.222.7820

SITE PREPARATION

Ducting

WARNING

Use only metal ducting.

Consult a qualied HVAC professional for specic installa-

tion and ducting applications.

The hood accommodates a 6"

(152) round duct. Use only

rigid metal ducting.

A straight, short duct run is most effective and will ensure

proper performance. If the duct run exceeds 50'

(15 m), a

higher CFM blower may be required to maintain proper

airow. A remote blower installed on a short duct run may

increase the potential for noise.

Internal and in-line blowers require a roof or wall cap. Use

sheet metal screws and aluminum tape or high temperature

duct tape to seal joints between ducting sections.

The hood includes a backdraft damper. Local codes may

require the use of an additional backdraft and/or make-up

air damper. Contact your local HVAC professional for

specic requirements.

A make-up air damper is available through an authorized

Wolf dealer.

CAUTION

To reduce the risk of re and to properly exhaust air,

duct air outside. Do not vent exhaust air into spaces

within walls, ceilings, attics, crawl spaces, or garages.

CAUTION

To reduce the risk of re and electrical shock, only

install this range hood with remote blower models

rated a maximum of 3A suitable for use with solid state

speed control or internal blowers manufactured by

Wolf, “Blower—600 CFM”.

1 2 3 4 5 6 7 8 9 ... 43 44

Sem comentários

Wolf VC36S Guia de Instalação Página 4