Wolf CT15I/S Especificações descarregar pdf (Página 12)

12

BEFORE OPERATING

Clean the ceramic glass surface carefully using

the Cooktop Cleaning Crème provided with the

c

ooktop. Remove all cleaning residue.

R

ead the entire Wolf Induction Cooktops

Use & Care Information included with the

cooktop. Important safety, service and

w

arranty information is contained within the

book.

COOKTOP REMOVAL

IMPORTANT NOTE:

This procedure should

only be performed by a Wolf authorized

service center.

If it is necessary to remove the cooktop for

cleaning or service, disconnect the electrical

supply. Remove the mounting brackets on the

right and left side of the unit and remove the

cooktop. Reinstall in the reverse order.

COOKTOP INSTALLATION

Attach the foam strip to the underside of the

cooktop frame. Refer to the illustration below.

Gently lower the cooktop into the cut-out area

i

n the countertop and center. Check that the

front edge of the cooktop is parallel to the

front edge of the countertop. Check that all

r

equired clearances are met.

Attach the brackets to the bottom of the unit,

as shown in the illustration below. Install the

clamping screws into the bracket and tighten

until the screws contact the underside of the

countertop.

Do not overtighten the screws.

IMPORTANT NOTE:

Do not seal the cooktop

to the countertop. It must be removed if

service is necessary.

COOKTOP

FOAM

STRIP

COOKTOP

COUNTERTOP

BRACKET

SCREWS

BRACKET

3

1

/2" (89)

CLAMPING

SCREW

Foam strip Installation brackets

If the ceramic glass top of the cooktop is

broken, turn off power to the unit. Do

not operate until glass has been replaced

by a Wolf authorized service center

.

WOLF INDUCTION COOKTOPS

1 2 ... 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários