Wolf CT15I/S Especificações descarregar pdf (Página 7)

Dimensions in parentheses are in

millimeters unless otherwise specified.

2"*min (51)

CUT-OUT TO

COMBUSTIBLE

MATERIALS

(BOTH SIDES)

18"

(457)

/4" (489)

COOKTOP CUT-OUT

DEPTH

/2"min

(64)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

13" max

(330)

30" (762)

COUNTERTOP TO

COMBUSTIBLE

MATERIALS

ABOVE COOKTOP

24"min

(610)

*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop. **Minimum clearance

from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

/4"min

(95)

30-INCH OVEN OPENING

/2"

(

114

)

10"

(254)

/2" (89)

/8" (721) COOKTOP

CUT-OUT WIDTH

/8" (721)

COOKTOP CUT-OUT WIDTH

FRONT OF COUNTERTOP

/2"min

(64)

/4" (489)

COOKTOP

CUT-OUT DEPTH

33" (838)

RECOMMENDED

ABINET WIDTH

30"min (762)

2"**

(51)

Overall Dimensions

Countertop Cut-Out

21"

(533)

OVERALL

DEPTH

30" (762)

OVERALL WIDTH

TERMINAL BOX

/2" (89)

/2" (114)

MODEL CT30I/S

The illustrations below provide installation

specifications for Model CT30I/S.

For ease of installation, 33" (838) cabinets are

ecommended for installation of Model

CT30I/S.

A Wolf 30" (762) or 36" (914) built-in single

oven may be installed below Model CT30I/S.

For this installation, unless you are using

cabinets deeper than 24" (610), it is recom-

mended that the electrical supply be placed in

the base cabinet to the right of the oven.

Refer to installation instructions provided with

the built-in oven for additional specifications.

If Model CT30I/S is installed above cabinets,

he electrical placement is not critical. A

grounded electrical box should be located

within 4' (1.2 m) of the right rear of the

ooktop.

MODEL CT30I/S

Overall Width 30" (762)

Overall Height 3

/2" (89)

Overall Depth 21" (533)

Minimum Cabinet Depth 22

/4" (578)

Minimum Height Clearance*4

/2" (114)

Cut-Out W

idth 28

/8" (721)

Cut-Out Depth 19

/4" (489)

INSTALLATION SPECIFICATIONS – MODEL CT30I/S

Dimensions in parentheses are in

millimeters unless otherwise specified.

Minimum

(

)

clearance is required

between countertop and any combustible

surface directly below the cooktop.

For detailed terminal block dimensions,

refer to the illustration on page 5.

Dimensions may var

y to

/8" (3).

INSTALLATION INSTRUCTIONS

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentários a estes Manuais

Sem comentários

Wolf CT15I/S Especificações Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf CT15I/S