Wolf CT30G/P Especificações descarregar pdf (Página 17)

100

2"*min (51)

CUT-OUT TO

COMBUSTIBLE

MATERIALS

(BOTH SIDES)

18"

(457)

36" (914)

STANDARD

FLOOR TO

COUNTERTOP

HEIGHT

30" (762)

COUNTERTOP TO

COMBUSTIBLE

MATERIALS

ABOVE COOKTOP

*Minimum clearance from both side edges and back edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.

39" (991)

RECOMMENDED CABINET WIDTH

36"min (914)

4" (102)

10"

(254)

/2" (89)

36-INCH OVEN OPENING

SEE COUNTERTOP

CUT-OUT BELOW

13" max

(330)

24"min

(610)

4"min (102)

SEE COUNTERTOP

CUT-OUT BELOW

21"

(533)

OVERALL

DEPTH

36" (914)

OVERALL WIDTH

4" (102)

OVERALL DIMENSIONS

Model CT36EU

INSTALLATION SPECIFICATIONS

Model CT36EU

Countertop Cut-Out Dimensions

WOLF ELECTRIC COOKTOPS

SPECIFICATIONS

Model CT36EU

36" (914) Unframed Electric Cooktop

Overall Width 36" (914)

Overall Height 4" (102)

Overall Depth 21" (533)

Heating Elements Five

Temperature Zones Eight

Max Element Power 1050 W / 2200 W /

(triple) 2700 W

Max Element Power 750 W / 2200 W

(dual)

Max Element Power 1200 W, 1500 W

(three single) and 1800 W

Cabinet Width 39" (991) rec

Cabinet Depth 22

/4" (578) min

Height Clearance 4" (102) min

Cut-Out Width 34

/8" (873)

Cut-Out Depth 19

/8" (492)

Electrical Supply 240 V AC / 60 Hz / 50 amp

208 V AC / 60 Hz / 40 amp

Conduit 4' (1.2 m) flexible 3-wire

Electrical Rating 9.4 kW at 240 V

7.1 kW at 208 V

Shipping Weight 60 lbs (27 kg)

The outer diameter of the heating elements are

" (302), 9

" (232), 7

" (200), 7

" (181)

and 6

" (165).

INSTALLATION OPTIONS

The Model CT36EU unframed electric cooktop

can be mounted flush with the top of the

countertop or as a frameless installation

sitting on top of the countertop surface. In

either installation the cooktop cut-out dimen-

sions are the same. If mounted flush with

the countertop, a recessed area surrounding

the cooktop cut-out is required.

IMPORTANT NOTE: Flush mount installations

are intended for granite, solid surface or

stone countertop surfaces only. If the

cooktop is to be mounted flush with the

countertop, fabrication of the recessed area

must take place before the final countertop

installation. A template of the countertop

cut-out will be provided with the cooktop for

fabrication purposes.

A Wolf 36" (914) single oven may be installed

below the Model CT36EU. For this installa-

tion, unless you are using cabinets deeper

than 24" (610), it is recommended that the

electrical supply be placed in the base

cabinet to the right of the oven. A Wolf 30"

(762) single oven may also be installed below

the Model CT36EU. Refer to pages 6–7 for

additional specifications.

When a 36" (914) oven is installed below a

cooktop, it is recommended that the rough

opening for the oven be 7

/4" (197) from the

floor to ease the use of the oven door.

/8"** (918)

RECESSED AREA FOR

FLUSH MOUNT INSTALLATION ONLY

/8" (873)

COOKTOP CUT-OUT WIDTH

/16" (49)

RADIUS

FRONT OF COUNTERTOP

/16" (62)

/8" (492)

COOKTOP

CUT-OUT DEPTH

/16" (40)

/8"** (537)

RECESSED AREA

FOR FLUSH MOUNT

INSTALLATION ONLY

/16" (11) RADIUS

**Minimum dimension, but may be exceeded by up to

" (3).

RECESSED AREA FOR

FLUSH MOUNT INSTALLATION ONLY

/16"

(

)

/8"

(22) max

COUNTERTOP

PROFILE

2"* (51)

Unit dimensions may vary to ±

" (3).

IMPORTANT NOTE: For flush mount applications,

it is recommended to measure the cooktop glass

before cutting the countertop to ensure a proper

fit. Small variances may exist between the

template and the cooktop.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 99 100

Comentários a estes Manuais

Sem comentários

Wolf CT30G/P Especificações Página 17

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf CT30G/P