Wolf Range Guia de Instalação descarregar pdf (Página 14)

Anti-Tip Bracket Installation

The anti-tip bracket can be installed by securing it to the

wall or floor using the supplied hardware.

For gas ranges, the anti-tip bracket should be positioned

(76) from the left side of the opening. This will ensure

the anti-tip bolt properly engages the bracket. Refer to the

illustration below.

DRYWALL APPLICATIONS

After properly positioning the anti-tip bracket, use wall

anchors to fasten it to the wall. Using a Philips screwdriver

or a low rpm screw gun, drive the anchor into the surface

of the wallboard until the two cutting blades penetrate the

surface. Use gentle forward pressure to rotate the collar

until flush with the surface of the wall. Refer to the illustra-

tion below. Use #8 screws and flat washers to fasten the

anti-tip bracket to the wall.

IMPORTANT NOTE: Pre-drill holes if difficulty is encoun-

tered during installation of the wall anchor. For hard wall-

board or double-board construction, use a

/4" drill bit.

For solid plaster, use a

/16" drill bit.

Gas Range Installation 14

Position the Range

IMPORTANT NOTE: B

efore moving the range, protect any

finished flooring to avoid damage to the floor. Secure oven

door(s) closed.

Using an appliance dolly, move the gas range into position

near the installation opening. Remove and discard packing

materials. If the oven door(s) need to be removed to

position the range, refer to oven door removal on the

following page.

This range can tip. Injury to persons could result. Install

the anti-tip bracket supplied with the range.

3" (76)

ANTI-TIP

BRACKET

Anti-tip bracket location. Wall anchor installation.

ANTI-TIP

BRACKET

WALL

ANCHOR

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários

Wolf Range Guia de Instalação Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf Range