Wolf Sub-Zero 700TF Guia de Instalação descarregar pdf (Página 14)

Integrated Installation 14

MOUNTING

BRACKET

Kickplate/grille installation.

he kickplate/grille may be painted another color, if

desired. Follow these easy steps:

• Rough up the surface to be painted with fine grit sand-

paper.

• Wipe with alcohol to ensure that the surface is clean

and dry.

• Use an appliance or industrial grade, oil base, high

gloss enamel paint.

Kickplate/Grille Installation

nce the integrated unit is secured, the kickplate/grille

can be installed. The mounting bracket may be adjusted

slightly forward or back so the kickplate/grille will fit flush

with the surrounding area. Refer to the illustration below.

The kickplate/grille must be removable for servicing. The

floor cannot interfere with removal.

IMPORTANT NOTE: The unit must be allowed to have

ventilation through the fins of the kickplate/grille. You may

cover the solid area, but do not block the fins. The lower

drawer panel may hang in front of the fins, but the base-

board molding must not cover them.

Turn power back on to the electrical outlet.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Wolf Sub-Zero 700TF Guia de Instalação Página 14