Wolf 1524 Especificações descarregar pdf (Página 14)

14

G A S S U P P LY R E Q U I R E M E N T S

G A S S U P P LY C O N N E C T I O N

IMPORTANT NOTE:

The gas range must be

connected to a regulated gas supply.

Provide a gas supply line of

3

/4" rigid pipe to

the range location. A smaller size pipe on long

r

uns may result in insufficient gas supply. Pipe

joint compounds, suitable for use with LP gas

should be used. For LP gas, piping or tubing

size can be

1

/2" minimum. LP gas suppliers

usually determine the size and materials used

on the system. If local codes permit, a certified,

3' (.9 m) long,

1

/2" or

3

/4" ID flexible metal

appliance connector is recommended for

connecting this range to the gas supply line.

The pipe coming out the back of the range

has

1

/2" female threads.

IMPORTANT NOTE:

The supply line must

be equipped with an approved external gas

shut-off valve located near the range in an

accessible location. Do not block access to the

shut-off valve. Refer to the illustration below.

The Wolf gas range functions up to 6,000'

(1828 m) in altitude without any adjustment. If

installation is above 6,000' (1828 m), contact

your Wolf dealer.

EXPLOSION HAZARD—

Use a certified gas supply line and install

a gas shut-off valve.

Securely tighten all gas connections.

The maximum gas supply pressure to the

regulator should never exceed 14" (34.9

mb) WC (water column); .5 psi (3.5 kPa).

F

ailure to do so can result in explosion,

fire or death.

W O L F G A S R A N G E S

Gas Supply

LineTo Appliance

SHUT-OFF VALVE

Open Position

Shut-off valve

I

M P O RTA N T

N O T E

This installation

must conform with

local codes and

ordinances. In the

absence of local

codes, installations

must conform with

the American

National Standard,

National Fuel Gas

Code.

T Y P E S O F G A S

There are two types of gas, natural and liquid

propane (LP). Conversions are required in

order for appliances designed for one gas to be

operated with the other gas. Such conversions

must be performed by a Wolf authorized service

center. Make sure your gas range is correctly

adjusted for the type of gas being used.

The product rating plate has information on

the type of gas that should be used. If this

information does not agree with the type of

gas available, check with the local gas supplier.

The rating plate is located under the drip pan

that supports the cooking grates, on the left

inside wall of the range. Refer to the illustra-

tion on page 3. The rating plate for Model

R482CF is located on the right inside wall.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários