Wolf 1524 Especificações descarregar pdf (Página 16)

16

W O L F G A S R A N G E S

ELECTRICAL SHOCK HAZARD –

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can

result in electric shock, fire or death.

The Wolf gas range requires a 110/120 V AC

electrical supply to operate the electronic

ignition system. The 6' (1.8 m) power supply

cord provided with the range is equipped with

a 3-prong, grounded plug for protection

against shock hazard. The service should have

its own 15 amp circuit breaker.

IMPORTANT NOTE:

You must follow all

National Electrical Code and gas regulations.

In addition, be aware of local codes and ordi-

nances when installing your services.

I

M P O RTA N T

N O T E

You must follow

all National

Electrical Code

regulations. In

addition, be aware

of local codes and

ordinances when

installing your

service.

R E C O M M E N D E D G R O U N D M E T H O D

IMPORTANT NOTE:

This appliance must be

properly grounded to avoid shock hazard.

The range is equipped with a 3-prong ground

plug. To minimize possible shock hazard, the

c

ord must be plugged into a mating 3-prong

ground-type outlet, grounded to conform with

the National Electrical Code, ANSI/NFPA 70

latest edition, or Canadian Electrical Code

(CSA) and all local codes and ordinances.

Refer to the illustration below.

IMPORTANT NOTE:

You must have a properly

grounded, 3-prong outlet installed by a quali-

fied electrician. A ground fault circuit inter-

rupter (GFCI) is not recommended and may

cause interruption of operation.

IMPORTANT NOTE:

Do not ground to a gas

pipe.

W I R I N G D I A G R A M

The wiring diagram covering the control circuit

is located inside the lower panel, below the

oven door panels.

E L E C T R I C A L R E Q U I R E M E N T S

Grounding Plug

Grounding-Type

Electrical Outlet

Electrical ground

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comentários a estes Manuais

Sem comentários