Wolf C48SS Especificações descarregar pdf (Página 25)

)LJ

4. Insert a flat edge screwdriver through the top of

the regulator. While watching the manometer,

turn the adjusting screw clockwise to increase

pressure and counterclockwise to decrease

pressure.

5. Install the regulator closing nut.

6. Apply thread sealant to pressure tap plug and

reinstall. Thread sealant must be insoluble in

propane and natural gas.

%URNERNO==LEC+EC.

The burner nozzle is mounted between the oven gas

supply tubing/mounting bracket and the u-burner

assembly. If burner operation seems poor and other

systems have been checked, access the burner for

the range section being serviced and remove the

burner nozzle.

• Check for blockage or damage.

• Verify gas orifice hood is correct for the altitude.

See Parts Catalog for Orifice Hood Chart.

O9EN%URNERNO==LE6+O:N

6TANDARDO9ENT+ER0O6TAT

%<3A66)LA0EAD-U6T0ENT

NOTE By-pass flame can be viewed through the kick

panel for adjustment.

1. Turn the thermostat knob to 350°F.

2. Wait 10 minutes for oven to heat up.

3. Turn thermostat knob to lowest setting.DONOT

TURNO)).

4. Remove thermostat knob.

5. With a screwdriver, turn by-pass flame

adjustment screw counterclockwise to increase

by-pass flame or clockwise to decrease flame

until the entire burner has approximately a 1/8"

stable flame on each port.

NOTE Some flickering of the flame is acceptable.

This is most likely to occur in the bend of the burner.

)LJ

6. Replace thermostat knob.

A. Turn knob to 350°F and verify increase in

flame height on burner ports.

7. Turn knob back to lowest setting. Verify decrease

in by-pass flame height on burner ports and that

burner remains lit.

6TANDARDO9ENT+ER0O6TAT

TE03ERATUREAD-U6T0ENT

A thermocouple type temperature probe should be

placed in center of oven to verify temperatures

throughout adjustment.

NOTE Calibration on this thermostat version is made

using the knob for temperature adjustments and not

the inner screw as on previous versions.

ENDURANCE / CHALLENGER MODULAR SERIES GAS RANGES - SERVICE PROCEDURES AND

ADJUSTMENTS

Page 25 of 33 F45471 (0913)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Comentários a estes Manuais

Sem comentários

Wolf C48SS Especificações Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf C48SS