Wolf C48SS Especificações descarregar pdf (Página 8)

)LJ

4. Pull burner carrier out through opening in lower

oven frame enough to access the oven pilot

assembly.

5. Remove screws securring oven pilot assembly to

burner carrier. Move oven pilot assembly away

from burner.

Do not bend and kink the capillary tube or

damage to the control may occur.

6. Pull burner carrier with burner attached out from

oven.

7. Remove screws securring burner to the burner

carrier.

)LJ

8. Slide oven burner off the burner nozzle to

remove.

9. Reverse procedure to install.

10. Perform

BURNER AIR SHUTTER

ADJUSTMENT.

6TANDARDO9ENT+ER0O6TAT

O9EN

Shut off the gas before servicing the

unit.

All gas joints disturbed during

servicing must be checked for leaks. Check with a

soap and water solution (bubbles). Do not use an open

flame.

1. Pull out crumb tray.

2. Remove

MANIFOLD COVER.

3. Remove oven thermostat knob.

4. Remove screw securing thermostat cover to

oven frame.

)LJ

5. Remove compression nut from elbow fitting at

the rear of thermostat.

6. Remove screws securing thermostat to mounting

flange.

)LJ

A. Inspect mounting flange and gasket. If okay,

they may be used during installation. If not

okay, remove and install replacement

flange.

ENDURANCE / CHALLENGER MODULAR SERIES GAS RANGES - REMOVAL AND REPLACEMENT OF PARTS

F45471 (0913) Page 8 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 32 33

Comentários a estes Manuais

Sem comentários

Wolf C48SS Especificações Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf C48SS