Wolf DD36I Manual do Utilizador descarregar pdf (Página 6)

6

Substituting down discharge with left

or right discharge:

Moves discharge from down position

to left or right of downdraft assembly.

• Place the unit on its back on a

table or work surface.

• Remove the 4 nuts and 2 clamp

channels.

• Carefully lift blower and disconnect

motor plug if necessary. Reposition

blower and reconnect motor plug.

• Use supplied cover plate to close

open space (if any).

• Replace clamp channels and use

nuts to secure the blower in its new

position.

• Use sheet metal screws through

bottom flange to secure bottom of

blower.

D OWNDRAFT I NSTALLATION

Left or right blower discharge

CHANGING BLOWER

DISCHARGE

Your Wolf Downdraft system has an

adjustable discharge that allows you

to route ducting around obstacles in

the floor or cabinet.

The blower is shipped with the dis-

charge facing down. Follow these

steps ONLY IF:

• The position of the blower dis-

charge needs to be moved so duct-

work does not interfere with floor

joists, plumbing or wiring below the

unit.

• It is necessary to rotate the blower

discharge to the RIGHT or LEFT.

NOTE: Follow the same procedure for

DD30R and DD36R.

Adjusting down discharge left to

right:

Keeps discharge from unit in the

down position but allows some side

to side mobility.

• Place the unit on its back on a

table or work surface.

• Loosen the 4 nuts and 2 clamp

channels.

• Slide blower to desired position.

• Use supplied cover plate to close

open space (if any).

• Tighten wing nuts to secure top of

blower and use sheet metal screws

through bottom flange to secure bot-

tom of blower.

Down blower discharge adjustment

bottom

flange

clamp

channel

nuts

sheet metal

screw

blower

cover plate

clamp

channel

nut

sheet metal

screw

blower

motor plug

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários