Wolf DD36I Manual do Utilizador descarregar pdf (Página 9)

9

INSTALL TOP COVER

• Depress the UP/DOWN button on

the user interface.

• Remove shipping brackets from

chimney.

• Align mounting brackets on back

surface of top cover with corner

mounting positions on top of down-

draft chimney.

• Screw top cover mounting brackets

into mounting holes on downdraft

chimney with four (4) screws provid-

ed. Verify that top cover is secure and

runs flush with the front edge of the

downdraft.

D OWNDRAFT I NSTALLATION

Wiring connections

DD30R or DD36R – External Blower:

• Mount a standard wiring box, with

3-pronged receptacle, inside the cabi-

net or adjacent cabinet. Make certain

the downdraft’s power cord can easi-

ly reach it.

• Run appropriate power cable into

cabinet and connect it to electrical

box and receptacle.

• External blower may not exceed

6.0 amp rating.

• Run 2-wire plus ground power

cable from the remote blower to

wiring box on remote blower adapter

plate.

• Connect downdraft wiring to

power cable from remote blower.

Wire black to black, white to white

and green to green or bare wire.

• Replace wiring box cover.

• Plug the downdraft’s power cord

into the outlet.

IMPORTANT NOTE: Refer to specific

external blower installation informa-

tion for mounting and installing

blower.

black to black

white to white

green to green

120 VAC line in

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários