Wolf DF604CF Manual de Serviço descarregar pdf (Página 45)

Component Access & Removal

4-5

DDuuaall FFuueell RRaannggee

Surface Burner Components

(SWS 17000000)

Burner Grate and Burner Assembly (SWS 17000000)

The burner grate locates on raised dimples formed on

the burner pan. The burner assemblies have screws

that pass through the assemblies, then thread into the

orifice holder located under the burner pan. Burner

caps are then placed over the burner assembly.

To remove the burner assembly, (See Figure 4-6A)

1. Remove burner grate from unit.

2. Remove burner caps from burner assembly.

3. Extract the two screws securing burner assembly to

orifice holder.

4. Lift assembly off burner pan and remove wire lead

from spark ignitor.

5. To remove spark ignitor from burner, extract screw

from underside of burner assembly and separate.

Burner Pan and Trim Moldings (SWS 17000000)

There are two “L” shaped trim moldings for each burner

pan that run from front to back of the unit. One mold-

ings fits between the outer side assembly and the burn-

er pan, the other molding fits between burner pans and

grill grate or french cook top assembly, depending on

the model.

To remove the burner pan,

1. Remove front and rear burner assemblies.

2. Remove trim moldings from each side of burner

pan. (See Figure 4-6B)

3. Lift burner pan out of unit.

Figure 4-6A. Burner Assembly Removal

Figure 4-6B. Trim Moldings

Burner Grate

Burner Cap

Screw

Screws

Burner

Assembly

Ignitor

Wire Lead

Burner Pan

Trim Moldings

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 107 108

Comentários a estes Manuais

Sem comentários

Wolf DF604CF Manual de Serviço Página 45

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Wolf DF604CF