Wolf FB363 Instruções de Operação descarregar pdf (Página 38)

3062449_030938

KM 01 Conguration The corresponding conguration may, subject to the application

of the KM, have to be selected. Up to 13 congurations can be

selected. corresponding wiring diagrams, see under "Electric

connection". Adjust the conguration during commissioning.

Conguration 01: Mixer circuit and cylinder circuit

Conguration 02: Mixer circuit and convector heater circuit

Conguration 03: Mixer circuit and heating circuit

Conguration 04: Cylinder circuit and third party boiler control

Conguration 05: Mixer circuit and return temperature raising for

heating backup

Conguration 06: Heating circuit and return temperature raising

for soft starting

Conguration 07: Mixer circuit with indirect return temperature

raising for soft starting

Conguration 08: Mixer circuit (factory setting)

Conguration 09: Heating circuit

Conguration 10: Cylinder circuit

Conguration 11: Convector heater circuit

Conguration 12: 0 – 10 V input for telecontrol system

Conguration 13: Return temperature raising, wood burning

boiler

Note: Only contractors should adjust the KM parameters.

Only operate boilers of the same type in a single cascade, i.e.

either modulating, single stage or two-stage boilers. Adjust the

conguration during commissioning.

km 02 = 1 ⇒ single stage boiler

km 02 = 2 ⇒ two-stage boiler

km 02 = 3 ⇒ modulating boiler (factory setting)

KM 02 Mode

The "Maximum header temperature" parameter limits the set

header temperature upwards.

KM 03 Maximum

header temperature

With the r.h. rotary selector, choose the cascade parameter to

be modied (KM..) from the contractor menu level (after entering

the correct code).

The cascade parameter to be modied (KM..) is changed by

pressing (display indicator ashes) and then turning the r.h. rotary

selector. After setting the cascade parameter to be modied (KM..),

pressing the r.h. rotary selector again conrms the setting.

Pressing the Info pushbutton returns the standard display.

Parameters / Function description

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 59 60

Comentários a estes Manuais

Sem comentários

Wolf FB363 Instruções de Operação Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Fornos Wolf FB363